Input Shaft Seal, Replacing, 0BC: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use VW391
Slide Hammer Set - Adapter 40 VW771/40 from the Slide Hammer Set VW771
Retainer - Drive Flange 3028
Puller - Unit Injector T10055
-2- Puller - Unit Injector - Adapter 2 T10055/2
Seal Installer - Driveshaft Flange T40109
Seal Installer - Input Shaft - Guide Sleeve T40222/1
Sealing Grease G 052 128 A1
Two M 8 x 30 Bolts
One M 8 x 45 bolt