Driveshaft, Removing And Installing From Rear Final Drive: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Counterhold - Kit - Multiple Use T10172
Counterhold - Kit - Adapter 5 T10172/5 (M8 Bolts)
Counterhold - Kit - Adapter 6 T10172/6 (M10 Bolts)
High Temperature Grease G 000 633

Pay attention to the notes. Refer to OVERVIEW - DRIVESHAFT, BOLTS ON TRANSMISSION SIDE .
A two-column workshop hoist should be used when working on the driveshaft.