Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 Coupe From My 2008)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Gear oil and ATF change Audi RS5

The RS5 gear oil and ATF must be changed.
RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .
For all other vehicles there is no change interval.

Rear Final Drive		0BF
Codes		LFU	LFV	LFW
Ratio	Final drive Z₂ : Z₁	35 : 9 = 3.889	37 : 9 = 4.111	43 : 13 = 3.308
Driveshaft flange diameter		75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .

Rear Final Drive		0BF
Codes		LGH	LGJ	MBV
Ratio	Final drive Z₂ : Z₁	37 : 10 = 3.700	35 : 8 = 4.375	35 : 9 = 3.889
Driveshaft flange diameter		75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .

Rear Final Drive		0BF
Codes		MBW	MKV	MKW
Ratio	Final drive Z₂ : Z₁	37 : 10 = 3.700	43 : 13 = 3.308	35 : 8 = 4.375
Driveshaft flange diameter		75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .

Rear Final Drive		0BF
Codes		MKX	MKY
Ratio	Final drive Z₂ : Z₁	35 : 9 = 3.889	37 : 10 = 3.700
Driveshaft flange diameter		75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to MAINTENANCE INTERVALS (SEDAN) .		Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .