LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (3.0L - Turbocharger & Supercharger - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor, Removing And Installing >> Installing

Charge Air Pressure Sensor, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the self-locking screws and the O-ring.

Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.

scientia non olet · About LEMON Manuals