Final Drive Identification, 0BD
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
The 0BD rear final drive unit is assigned to the following transmissions:
- 6-Speed Manual Transmission 0B2 AWD
- 6-Speed Manual Transmission 0B4 AWD
- 7-Speed DSG Transmission 0B5 AWD
- Automatic Transmission 0B6 AWD
- 8-Speed Automatic Transmission 0BK AWD
Rear Final Drive Allocation
- Refer to TRANSMISSION/ENGINE ALLOCATION
Layout on Rear Final Drive
Final drive 0BD, code letters and manufacture date -arrow-
-Arrow A- Final Drive 0BD with Part Number (example: 0BD 500 043A)
-Arrow B- Code Letters "JTN"
-Arrow C- Rear Final Drive Date of Manufacture
| Example: | F | 292 | 3242 |
|---|---|---|---|
| I | I | I | |
| Production year - 2006- F = 2006, G = 2007, H = 2008, etc. | Production date -292nd calendar day- (always given in three-digit format) | day of manufacture serial number |
Additional data can be ignored.
NOTE:
If the rear final drive unit is replaced, not only the rear final drive code, but also the PR number and the vehicle engine code must be verified . This is the only to assure the correct allocation.