ATF On Rear Final Drive 0BF And 0BE, Draining
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
Rear Final Drive 0BF
-- Remove the ATF check plug -arrow- so that the ATF drains faster.
-- Remove the ATF drain plug -arrow- and drain the ATF.
-- Install the new ATF drain plug -arrow- and tighten. Tightening specification, refer to -item 15- ATF Drain Plug (See Figure).
Rear Final Drive 0BE
-- Remove the ATF check plug -1- so that the ATF drains faster out of the drain hole.
-- Remove the ATF drain plug -2- and drain the ATF.
-- Install the new ATF drain plug -2- and tighten. Tightening specification, refer to -item 15- ATF Drain Plug (See Figure).
Continuation for All Rear Final Drives
-- Fill with ATF in the rear final drive. Refer to ATF ON REAR FINAL DRIVE 0BF AND 0BE, FILLING .