Front seat rail covers, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Rail Covers Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Front seat

2 - Seat rail covers (Qty. 2)

Removal:

Move front seat - 1 - fully to the rear.
Remove securing clips - 3 - (2x).
Remove seat rail covers - 2 - (2x).

Installing:

Installation is reverse of removal.

3 - Securing clips (Qty. 2)