LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1318 (Cylinder Head, VALVETRAIN (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Cam Adjustment Actuator, Removing And Installing >> Removing

Cam Adjustment Actuator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- If equipped, remove the connector strip bolts -arrow-.

GWWA28-10114Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -arrows- from the cam adjustment actuators.

GWWA15-10730Courtesy of AUDI OF AMERICA, LLC

-- Remove the cam adjustment actuators -arrows-.

GWWA15-10731Courtesy of AUDI OF AMERICA, LLC