Bearing Bracket, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them. Tightening specifications. Refer to -item ) OVERVIEW - CYLINDER HEAD.

-- Lubricate the hole -arrow- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

Carefully mount the bearing bracket without tilting it.

Courtesy of AUDI OF AMERICA, LLC

-- Attach the bearing mount and install the bolts -arrows- all the way by hand.

-- Depending on the version, remove either the :T40011 or the :T40267 .

-- Tighten the bearing bracket bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAINS .

Installation Is Performed In Reverse Order Of Removal, Noting The Following:

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- There may be additional procedures depending on the model. Refer to BEARING BRACKET, REMOVING AND INSTALLING / CHAIN DRIVE .