LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1294 (General, Technical Data (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On SUBFRAME

Safety Precautions When Working On SUBFRAME

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Risk of Damaging the Components

If the subframe mount, steering gear or subframe crossbrace is incorrectly installed resting the vehicle on its wheels can damage components.

-- Never place the vehicle with loosened suspension components on its wheels.

-- Never support the vehicle with loosened suspension components on the subframe of subframe crossbrace.

scientia non olet · About LEMON Manuals