Tightening Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Tighten The Bolts In The Steps Shown In The Sequence:

Fig 1: Tightening Sequence For Cylinder Head Bolts

Courtesy of AUDI OF AMERICA, LLC

Step	Bolts	Tightening specification/additional turn
1.	-1 through 10-	Install by hand all the way
2.	-1 through 10-	"Without collar" 40 Nm "with collar" 50 Nm, difference. Refer To OVERVIEW - CYLINDER HEAD .
3.	-1 through 10-	90° additional turn
4.	-1 through 10-	90° additional turn
5.	-arrows-	8 Nm
6.	-arrows-	90° additional turn

Fig 2: Checking For Distortion

Courtesy of AUDI OF AMERICA, LLC

-- Check The Cylinder Head In Several Places For Distortion Using A Straight Edge And A Feeler Gauge.

Maximum Permissible Distortion: 0.05 mm.

Fig 3: Tightening Sequence For Oil Separator

Courtesy of AUDI OF AMERICA, LLC