Transmission Side Sealing Flange, Removing And Installing, Oil Side Sealing Lip: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Non-hybrid vehicles: transmission removed. Refer to appropriate service information. .
- Hybrid vehicles: engine is removed and is secured on the Engine and Transmission Holder :VAS6095A . Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .
-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
-- Unhook the intermediate plate from the sealing flange and at the alignment sleeves -arrows-.
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Pry out the sealing flange.