LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1191 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the :10-201  to loosen the bolts.

GWWA13-11063Courtesy of AUDI OF AMERICA, LLC
CAUTION:

- When loosening and tightening the bolts, do not damage the drive plate centering flange.

-- Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.

scientia non olet · About LEMON Manuals