LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1191 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Ribbed Belt, Removing And Installing, Vehicles With Hydraulic Power Steering >> Removing

Ribbed Belt, Removing And Installing, Vehicles With Hydraulic Power Steering: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

- When performing procedures near the radiator maintain a distance to the radiator.

GWWA13-10637Courtesy of AUDI OF AMERICA, LLC
CAUTION:

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Turn the tensioner in the direction of -arrow- to release the tension on the ribbed belt.

-- Secure the tensioner with the :T40098  .

-- Remove the ribbed belt.

scientia non olet · About LEMON Manuals