LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1191 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Balance Shaft, Removing And Installing, Exhaust Side >> Removing

Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator. Refer to RADIATOR/RADIATOR FAN .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- on the exhaust camshaft balance shaft.

GWWA15-10467Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394/1  from the :T10394  .

GWWA15-10772Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394  and push the sliding sleeve in the direction of -arrow-.

GWWA15-10773Courtesy of AUDI OF AMERICA, LLC

-- Install the :T10055  into the :T10394  and remove the balance shaft.

GWWA15-10774Courtesy of AUDI OF AMERICA, LLC