LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1175 (Cooling System [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Coupe)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Small Coolant Pipe, Removing And Installing >> Installing

Small Coolant Pipe, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal While Noting The Following: 

NOTE:

Replace The O-Rings.

Secure All Hose Connections With Hose Clamps That Match The Ones Used In Series Production.

-- Connect The Coolant Hose To The Connector Coupling. Refer To Figure.

NOTE:

Used Coolant Cannot Be Used Again.

-- Fill With Coolant. Refer To COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals