Input Shaft 1, Disassembling And Assembling: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Two-Arm Puller :VAS251001
- Seal Installer - Shaft Seal :T10431/1
- Wishbone Rubber Mount Assembly Tool :T10219/1
- Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A
- Press Plate :VW401
- Press Plate :VW402