Cam Position Sensor 3 -G300-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Required preliminary work. Refer to CAMSHAFT POSITION SENSOR 3 -G300-, REMOVING AND INSTALLING [CEUC, CRDB, CTGE, CWUB, CWUC ENGINES] and/or CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING [CREC, CRED, CREH ENGINES] .
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -3- from the Cam Position Sensor 3 -G300- -2-.
-- Remove the bolt -1- and remove the camshaft position sensor.