Overview - Automatic Headlamp Range Control

Fig 1: Automatic Headlamp Vertical Aim Control Overview

Courtesy of AUDI OF AMERICA, LLC

1. Right Headlamp Beam Adjustment Motor -V49-
   • Various periods of time are determined depending on the model version.
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING .
2. Control Module
   • Vehicles without cornering lamps: Headlamp Range Control Module -J431-
   • Vehicles with cornering lamps: Cornering Lamp and Headlamp Range Control Module -J745-
   • Removing and installing. Refer to HEADLAMP RANGE CONTROL MODULE, REMOVING AND INSTALLING .
   • Depending on the version From MY 2012, USA From MY 2013, it is integrated in the Vehicle Electrical System Control Module -J519-.
3. Connector
4. Left Rear Level Control System Sensor -G76-
   • Component Location: On The Left Rear Control Arm
   • Removing and installing. Refer to LEFT/RIGHT REAR LEVEL CONTROL SYSTEM SENSOR -G76- / -G77-, REMOVING AND INSTALLING .
5. Left Front Level Control System Sensor -G78-
   • Component Location: On The Left Front Control Arm
   • Depending On The Date Of Manufacture
   • Removing and installing. Refer to LEFT/RIGHT REAR LEVEL CONTROL SYSTEM SENSOR -G76- / -G77-, REMOVING AND INSTALLING .
6. Left Headlamp Beam Adjustment Motor -V48-
   • Various Periods Of Time Are Determined Depending On The Model Version.
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING .