Securing On Engine And Transmission Holder

Special tools and workshop equipment required

Holding Plate VW 309
Hook and Support Tool T40197
Engine and Transmission Holder VAS 6095
Shop Crane -Load Cap=700-1200kg VAS 6100

Procedure

Fig 1: Identifying Transmission Holding Fixture Setup

Courtesy of AUDI OF AMERICA, LLC

Transmission secured with the VAS 6100, refer to TRANSMISSION, TRANSPORTING .

-- Install the VW 309 on the T40197.

-- Place the transmission into the VAS 6095 using the VAS 6100.

Fig 2: Identifying Transmission Holding Fixture Setup

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.