LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 3.0T >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags, Seat Belts (Cabriolet) >> 69 Passenger Protection, Airbags, Seat Belts >> Rollover Protection >> Rollover Support Trim, Removing And Installing >> Removing

Rollover Support Trim, Removing And Installing: Removing

Fig 1: Identifying Convertible Top Compartment Cover Locking Motor -V222-
GWWA70-11083Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
WARNING:

Follow the safety precautions for the rollover protection. Refer to ROLLOVER PROTECTION .

-- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

-- Support the convertible top with a suitable wood rod.

-- Disconnect the battery ground cable. Refer to BATTERY .

-- Unhook the hooks on the rollover support trim -1- through the openings in the rollover protection aluminum mount -arrow A-.

Fig 2: Removing Rollover Protection Trim
GWWA69-10554Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- At the same time, push the trim with the :3409  upward -arrow B- to prevent the hooks from getting hooked in again.

-- Do this to all 4 hooks and then remove the trim.