LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 3.0T >> Repair and Diagnosis >> Brakes >> Hose, Tubing, Fittings & Reservoirs >> Mechanical Components - Brake System (Cabriolet) >> 46 Mechanical Components >> Front Brakes >> Brake Caliper, Removing And Installing >> Brake Caliper, Removing And Installing, Ceramic Brakes 1LW >> Notes

Brake Caliper, Removing And Installing, Ceramic Brakes 1LW: Notes

NOTE:

Do not loosen the bolts -1- to remove the brake caliper.

Fig 1: Exploded View Of Front Brake Caliper Assembly, Ceramic Brakes
GWWA46-10143Courtesy of AUDI OF AMERICA, LLC
  1. Brake Caliper
    • Do not hang on brake hose during necessary installation steps, but rather secure to body with wire.
  2. Bolts
    • 196 Nm. 
      NOTE:

      Always replace if removed

  3. Brake Carrier
    • 190 Nm 
    • Bolt to wheel bearing housing
    • Bolted with brake caliper
  4. Bracket Bolt
    • 25 Nm 
  5. Brake Line Bracket
    • Hook in brake line
NOTE:

Do not loosen the bolts -1- to remove the brake caliper.

Fig 2: Front Brake Caliper Assembly Overview, Ceramic Brakes
GWWA46-10143Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals