LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 3.0T >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Upholstery, Covers (Cabriolet) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver And Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing >> Driver/Front Passenger Seat Heating Element - Z6- / - Z8-, Removing And Installing, Bucket Seat >> Removing

Driver/Front Passenger Seat Heating Element - Z6- / - Z8-, Removing And Installing, Bucket Seat: Removing

Fig 1: Cutting Electrical Wire -5- Off Directly At Old Seat Heating Element -Arrow
GWWA74-10375Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, BUCKET SEAT .

-- Cut the wire -5- off directly at the old seat heating element -arrow-.

NOTE:

The old seat heating element remains on the cushion and the new seat heating element is bonded over it.

-- Remove the old electrical wire.

scientia non olet · About LEMON Manuals