Driver And Front Passenger Seat Heating Element -Z6- And -Z8-, Removing And Installing, Standard Seat: Removing
-- Remove the seat pan cover and cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .
-- Separate the cover from the cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .
-- Cut the wire -3- off directly at the old seat heating element -2-.
NOTE:
The old seat heating element remains on the cushion -1- and the new seat heating element is bonded over it.
Ignore -A through E- and -arrows-.