Wheel Run-Out Compensation
Special Tools And Workshop Equipment Required
- Brake pedal actuator:V.A.G 1869/2
NOTE:
The lateral run-out of the wheel must be compensated for. Otherwise, measurement will result in false readings.
Permissible axial run-out of the wheel rims can exceed the specified toe setting tolerance. If compensation for wheel run-out is not performed, it will not be possible to obtain a correct toe-in adjustment.
A correct toe-in adjustment will not be possible without performing lateral run-out compensation!
-- For this, observe notes by manufacturer of wheel alignment equipment.
-- Insert :V.A.G 1869/2 .