Gear Oil, Checking Level, 0BC

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Drip Tray

-- Remove the plug to check the transmission fluid level -arrow-.

Fig 1: Locating Rear Final Drive Plug For Checking Fluid Level (0BC)

Courtesy of AUDI OF AMERICA, LLC

The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.

Use correct transmission fluid specification.

-- Install the plug -arrow- and tighten it.

Tightening specification 30 Nm.