Ski sack cover, cutting out (non-folding seat)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Ski sack removed

Cut cover starting at middle and working out to corners.

Fig 1: Ski Sack Cover, Cutting Out (Non-Folding Seat)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cut triangles to dimension - a -, approx. 30 mm.
Install ski sack.
Place 30 mm of cover fabric between ski bag and backrest frame.
Clip ski-sack frame into place.