LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Hydraulic Power Steering >> Removing

Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Hydraulic Power Steering: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING, VEHICLES WITH HYDRAULIC POWER STEERING .

-- Remove the bolt -1- and remove the ribbed belt tensioner from the sub-assembly bracket.

GWWA13-10637Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals