Overview - Lower Rear Lid Trim Panel (AVANT)

Fig 1: Overview Of Lower Rear Lid Trim Panel (Avant)

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • for tail lamps
   • Removing and installing. Refer to TAIL LAMP COVER, REMOVING AND INSTALLING .
2. Rubber Buffer
   • Quantity: 6
   • Insert in the trim panel
3. Clip
   • Quantity: 12
   • Insert in the trim panel
   • Replace if damaged or deformed
   • Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
4. Lower Rear Lid Trim Panel
   • Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING (AVANT) .
5. Luggage Compartment Lamp
   • Removing and installing. Refer to [For engine(s) CCBA, CGXC, CTUB, CAED, CAEB, CALA, CPMB, CPMA] Lamps .
6. Cover
   • for the warning triangle
   • Removing and installing. Refer to EMERGENCY TRIANGLE COVER, REMOVING AND INSTALLING .
7. Cover
   • For the emergency release
8. Trim Panel
   • For rear lid lock
   • Removing and installing. Refer to REAR LID LOCK TRIM PANEL, REMOVING AND INSTALLING (AVANT) .
9. Bolt
   • 2 Nm
   • Quantity: 4