LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Final Drive 0BF & 0BE - Sport Differential - General & Technical Data (Sedan) >> 00 General, Technical Data >> Codes, Transmission Allocation, Ratios And Capacities >> Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 SPORTBACK From My 2010)

Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 SPORTBACK From My 2010)

Rear Final Drive   0BF
Codes   LFV MBV MBW
Ratio Final drive Z2 : Z1 37 : 9 = 4.111 35 : 9 = 3.889 37 : 10 = 3.700
Driveshaft flange diameter   75.5 mm 75.5 mm 75.5 mm
Gear oil - capacity
  • For rear final drive (differential and pinion)
  • No replacement interval
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity
  • For the hydraulic control unit and chambers
  • No replacement interval
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
Rear Final Drive   0BF
Codes   MKU MKX MKY
Ratio Final drive Z2 : Z1 37 : 9 = 4.111 35 : 9 = 3.889 37 : 10 = 3.700
Driveshaft flange diameter   75.5 mm 75.5 mm 75.5 mm
Gear oil - capacity
  • For rear final drive (differential and pinion)
  • No replacement interval
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity
  • For the hydraulic control unit and chambers
  • No replacement interval
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .