LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Rear Lid >> Hinges, Removing And Installing >> Hinges, Removing And Installing, Sedan >> Lid Lock Spring

Lid Lock Spring

Fig 1: Identifying Rear Lid Lock Spring
GWWA55-10329Courtesy of AUDI OF AMERICA, LLC
  1. Brake Component
    • No replacement part.
  2. Lid Hinge
  3. Spring
    • Pay attention to the connection points.
scientia non olet · About LEMON Manuals