Overview - Rear Lid Latch

Fig 1: Overview Of Rear Lid Latch

Courtesy of AUDI OF AMERICA, LLC

Lid Latch
- Loosen the upper bumper cover and push it aside.
- Disconnect the lid lock cable at the coupling.
- Disconnect the connector.
- Loosen the bolts -3- and remove the latch forward from the lock carrier.
  NOTE:
  To adjust the hood height, move the lid lock up or down as required.
Lock Carrier
Bolt
- 11 Nm
Clip
- Slide the clamp with the electrical wire onto the tab on the lock carrier.
Lid Lock Wire
Tab