LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Hood >> Overview - Gas-Filled Strut

Overview - Gas-Filled Strut

Fig 1: Gas-Filled Strut
GWWA55-10308Courtesy of AUDI OF AMERICA, LLC
  1. Gas-Filled Strut
    • To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.
      NOTE:

      Ensure correct positioning during installation: the gas-filled strut tube must be attached on the body-side.

  2. Hood
  3. Ball Pin
    • 21 Nm
scientia non olet · About LEMON Manuals