LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Hood >> Hood Release Lever, Removing And Installing >> Release Lever Cover, Removing

Release Lever Cover, Removing

Fig 1: Identifying Operating Lever Cover
GWWA55-10301Courtesy of AUDI OF AMERICA, LLC
  1. >>A-Pillar<< Lower Trim
  2. Hood Release Lever Cover
    • First disengage the cable from the coupling inside the engine compartment. Refer to Cable Coupling 
    • Pry the clip out of the hood release lever.
    • Remove the cover sideways from the operating lever.
  3. Operating Lever
  4. Clip
    • Press in completely, it must engage.
scientia non olet · About LEMON Manuals