LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim (Sedan) >> 70 Interior Trim >> Roof Trim Panels >> Roof End Strip, Removing And Installing >> Installing

Roof End Strip, Removing And Installing: Installing

Fig 1: Mount Rear Roof Panel Trim -1- So That Hooks Touch D-Pillar Trim
GWWA70-11015Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

NOTE:

If the trim clamps remain in the body mounting points, remove them and insert them in the trim.

Check clamps for damage or deformation, replace if necessary.

-- Mount the rear roof panel trim -1- so that the hooks touch the D-pillar trim.

-- Position the rear roof panel trim on the pins, then press on it until the clips audibly engage.