Guidelines For Clean Working Conditions

Always clean the connection locations and the area around them before loosening.
Clean the transmission and transmission components using Cleaning SolutionD 009 401 04.
Use lint-free cloths when cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set VAS6122.
Place removed parts on a clean surface and cover them. Use foil or lint-free cloths.
Cover or plug unpacked components if repairs cannot be performed immediately.
Only install clean components: Remove the replacement parts from their packaging just prior to installing them.
Protect the disconnected connectors from dirt and moisture and only connect when they are dry.