LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Upper Timing Chain Cover, Removing And Installing >> Removing

Upper Timing Chain Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Camshaft Adjustment Valve 1 - N205-. Refer to Camshaft Adjustment Valve 1 - N205-, Removing and Installing .

-- If necessary, remove the oil dipstick tube from the lower timing chain cover.

-- Remove the bolts -1 through 5- and the upper timing chain cover.

Fig 1: Upper Timing Chain Cover - Tightening Sequence
GWWA15-10430Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals