Check points after complete backrest installation

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Seat belt relay and belt webbing must not make contact with or rub against foam parts or seat cover fabric.
Anti-twist stop must follow all movements of belt webbing.
Belt webbing must move freely in all directions.