Backrest frame, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Backrest Frame, Wire Clips, Backrest Cover & Clips

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Backrest frame

Removal:

Remove backrest cover panel → Backrest cover, removing and installing .
Pry out clips - 4 - (5x).
Remove backrest frame - 1 -.

Installing:

Installation is reverse of removal.

2 - Wire clips (Qty. 3)

3 - Backrest cover

4 - Clips (Qty. 5)