Airbag Adapter VAS 6036, connecting

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Airbag Adapter VAS 6036

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Airbag adapter VAS 6036

CAUTION: Technician must be grounded before disconnecting ignition and ground wiring, touching door striker or body.

CAUTION: The Airbag Adapter VAS 6036 must stay connected to seat until seat is installed again.

Fig 2: Airbag Adapter VAS 6036, Connecting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Seat connector power supply connector (red)

2 - Voltage supply connector for airbag adapter (red)

3 - Airbag adapter connector (yellow)

4 - Airbag connector (yellow)

Disconnect ignition and ground wiring.
Connect airbag connector - 4 - to airbag adapter connector - 3 -.

If present:

Connect voltage supply connector for airbag adapter - 2 - to voltage supply connector for seat - 1 -.