LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1640 (Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)) >> 72 - Seat - Frames >> Front RS sport seat >> Connector housing with terminal resistance for side airbag

Connector housing with terminal resistance for side airbag

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connector Housing With Terminal Resistance For Side Airbag
GW00021015Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • The RS sport seat has no side airbag. Therefore, the electrical connection for the side airbag must have a terminal resistance - arrow  - in the wiring harness.
  • Depending on the version, this terminal resistance is securely connected to the wiring harness, or is designed as a separate connector housing with terminal resistance.
scientia non olet · About LEMON Manuals