Coolant Pump Toothed Belt, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the toothed belt guard.
TIP:
The drive wheel bolt has left-hand thread.
-- Loosen the bolt on the coolant pump drive wheel -1- clockwise in the direction of -arrow- and unscrew it three turns using the :VAG1410 and the : T10360 .
-- Remove the toothed belt -2-.