LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CCBA, CGXC & CTUB (Sedan) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Right Cylinder Head Cover, Removing And Installing >> Removing

Right Cylinder Head Cover, Removing And Installing: Removing

Fig 1: Identifying Ignition Coil Puller T40039 Removing Ignition Coils
GWWA28-0074Courtesy of AUDI OF AMERICA, LLC

-- Remove the ignition coils. Refer to IGNITION COILS, REMOVING AND INSTALLING .

CAUTION:

Risk of violating emissions legislation on USA vehicles.

  • Do not open the hose connection -arrow-.

-- Remove the bolts in the following sequence -12 through 1- and lay the right cylinder head aside with the crankcase ventilation hose -arrow- connected.

scientia non olet · About LEMON Manuals