Charge Air Pressure Sensor, Removing And Installing: Removing

Version 2 Cylinder Bank 1 (right)

Fig 1: Identifying Version 2 Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and move the bracket and fuel hose -1- to the side.

Cylinder Bank 2 (left)

Fig 2: Identifying Vacuum Hose -1-, Bolts -Arrows- And Cover -2-

Courtesy of AUDI OF AMERICA, LLC

-- Free up the vacuum hose -1-.

-- Remove the bolts -arrows- and remove the cover -2-.

Continued for Both Sides

-- Disconnect the connector -1-.

-- Remove the bolts -arrows- and remove the charge air pressure sensor.

Fig 3: Installation Location Of Charge Air Pressure Sensor /Intake Manifold Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC