Overview - Glove Compartment

Fig 1: Overview Of Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

Glove Compartment Lamp -W6-
- Removing and Installing. Refer to Glove Compartment Lamp -W6-, REMOVING AND INSTALLING .
Footwell Lamp
- Removing and installing. Refer to LEFT/RIGHT REAR FOOTWELL LAMP -W45- / -W46-, REMOVING AND INSTALLING
Front Passenger Side Instrument Panel Cover
- Removing and installing. Refer to FRONT PASSENGER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 2
Hinge Pin
- For securing the glove compartment cover
Rubber Buffer
- For the glove compartment
- Quantity: 6
Glove Compartment
- Removing and installing. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
Spring Nut
Brake component
- For the glove compartment lid
- With Glove Compartment Lamp Switch -E26-
- Removing and installing. Refer to GLOVE COMPARTMENT LID BRAKING ELEMENT, REMOVING AND INSTALLING .
Hinge Pin
Bolt
- 3 Nm
Bolt
- 3 Nm
- Quantity: 3 or 5 depending on the country
Mount
- for striker pin
Front Passenger Airbag Deactivation Key Switch -E224-
- Not for North American market.
Bracket
Bolt
- 3 Nm
- The quantity depends on the equipment level or the country
Glove Compartment Cover
- Removing and installing. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .
Glove Compartment Opener
- Removing and installing. Refer to GLOVE COMPARTMENT HANDLE, REMOVING AND INSTALLING .
Stop Buffer
- For the glove compartment lid