LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Final Drive 0BF & 0BE - Sport Differential - General & Technical Data (Sedan) >> 00 General, Technical Data >> Codes, Transmission Allocation, Ratios And Capacities >> Codes, Transmission Allocations, Ratios And Capacities (For AUDI A7 From My 2011)

Codes, Transmission Allocations, Ratios And Capacities (For AUDI A7 From My 2011)

Rear Final Drive   0BF
Codes   MKU    
Ratio Final drive Z2 : Z1 37 : 9 = 4.111    
Driveshaft flange diameter   75.5 mm    
Gear oil - capacity
  • For rear final drive (differential and pinion)
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity
  • For the hydraulic control unit and chambers
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
scientia non olet · About LEMON Manuals