Rear Lid Lock, Removing And Installing, Sedan

Fig 1: Identifying Rear Lid Lock

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Before removing the lid trim, remove from the lid latch
2. Nut
   • 21 Nm
3. Cover for Lid Latch
   • When installing, cover must engage audibly in lid latch.
4. Lid Latch
   • Before removal, remove the lid latch cover.
   • The rear lid trim panel is removed. Refer to COMPONENT LOCATION OVERVIEW - REAR LID TRIM PANELS .
   • Disconnect the connector.
   • If necessary, disengage the emergency release cable.
   • Remove nuts and remove lid latch.
   • Remove the lid latch with the clip from the centering hole.
5. Centering Hole
6. Centering Clip
   • To install, first press the lid lock with the clip into the centering hole.