LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Rear Lid >> Lid Latch Emergency Release >> Routing on the Body Side

Routing on the Body Side

Fig 1: Routing Release Cable On The Body Side
GWWA55-10328Courtesy of AUDI OF AMERICA, LLC
  1. Release Cable
    • Starting from the lid latch, route the cable over the lid hinge and into the vehicle interior as illustrated.
  2. Lid Latch
  3. Lid Hinge
  4. Cover
    • Mounted on the lid hinge and attach it to the back side with the straps.
    • The cable must be correctly routes into the cover.
  5. Clip
    • The clips have been prepositioned and must be clipped into the holes.
scientia non olet · About LEMON Manuals