LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Hood >> Overview - Release Cable >> Routing the Release Cable Inside the Engine Compartment

Routing the Release Cable Inside the Engine Compartment

Fig 1: Identifying Release Cable Routing In Engine Compartment
GWWA55-10315Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- as shown in the illustration in the engine compartment along the fender -3-, beginning from the vehicle interior and working out.

-- Slide the coupling -4- onto the lock carrier. Refer to "Cable Coupling" (See Figure).