LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Hood >> Insulation, Removing And Installing

Insulation, Removing And Installing

Fig 1: Removing/Installing Hood Insulation
GWWA55-10307Courtesy of AUDI OF AMERICA, LLC
  1. Clip
  2. Hold Panel
    • Installation:

      -- Slide the lining over the tabs on the rear edge into the holes provided on the inner panel.

      -- Slide the tabs on the front edge and the sides into place.

      -- The clips must engage audibly when pressing in.

      -- Press the clip in.

  3. Door
  4. Clip
scientia non olet · About LEMON Manuals